We do not sell Polaris or Scag at our Tyler location.

2018 Land Pride RCM4614

Call for Price

RC4620 Model Shown

RC4620 Model Shown

Land Pride



Land Pride is pleased to introduce our new single wing, 14-foot RC4614 Rotary Cutter, designed for use in contract- and municipal mowing applications. Right of ways, roadsides, pastures, open areas, and row crop fields are all candidates for this heavy-duty cutter.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Saves customer set-up time and money. Adjustments should always be made by dealer.
  • 7 Year gearbox warranty*: Shows confidence in gearbox integrity. Years 6 & 7 parts only.
  • 250 HP divider gearbox; 210 HP center & wing gearboxes: Rugged heavy-built gearboxes capable of handling heavy-cutting applications.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
  • Input driveline: Cat. 6 CV: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Easy greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
  • 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
  • High blade tip speed: Allows clean cutting of material & even distribution. See Specifications for actual FPM.
  • 6" Blade overlap: Eliminates skipping during turns.
  • Good cutting capacity: Can cut brushy areas with saplings up to 3".
  • 13" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • Stump Jumper / Blade Holder: Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
  • Spindle Nut Protected: Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
  • 10 gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 1/4" side skirt: Reduces debris piercing possibilities.
  • Self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Hinged wing section: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • 1" Solid hinge rod: Larger diameter hinge gives greater strength to cutter and hinge area.
  • Wing transport lock: Holds transport wing in the folded-up position in case of hydraulic pressure loss.
  • Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring-cushioned center axle: Protects unit from bumps and ground shock, cushions loads on drawbar.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
  • Rephasing lift cylinders: Allows cutter to be leveled using hydraulic cylinders versus mechanical turnbuckles.
  • 7/8" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain.
  • LP Performance Hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Roadway light kit option: Allows operator to transport on public roads safer when headlights are turned on and/or when flasher lights are turned on.
  • Wheel options: Laminated tires: Eliminates flats; Air-filled tires: Give better cushion while transporting; Foam-filled tires: Give better cushion while transporting & can’t go flat.
  • Deck rings (optional): Keeps blades from damaging the deck.
  • PTO Horsepower: 70 to 250 HP
  • Gearbox Horsepower: 250 HP Splitter; 210 HP Center & Wing
  • Gearbox Oil Capacity: 6.2 Pints: Divider Gearbox; 4.7 Pints: Center deck, RH deck spindle gearboxes
  • Gear Box Lubrication: Gear Lube 80-90W EP
  • Cutting Capacity: 3"
  • Weights: Total Machine: 6,125 lbs. (Front & rear single chain guards, 5 AC tires, diamond blade bar with dishpan, without deck ring, CV driveline, and standard clevis.)
  • Weights: Tongue Weight: 2,220 lbs
  • Blade Tip Speed RCM4614: Up to 18,000 FPM
  • Hitch Types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Hitch Jack: Standard (7,000 lbs.)
  • Cutting Width: 13' - 6"
  • Overall Width: 14' - 9 1/4"
  • Minimum Transport Width: 9' - 2 3/4" (With cutting height at 2")
  • Overall Length: 17' - 8 1/2" (With cutting height at 2")
  • Deck Height: 13"
  • Cutting Height: 2" to 12"
  • Lift Hydraulics Center Deck: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers.
  • Lift Hydraulics Right Wing: 3" x 8" Rephasing hydraulic cylinder with hoses & fittings.
  • Wing Folding Hydraulics: 3" x 12" single-acting hydraulic cylinder complete with hose & fittings.
  • Wing Flex: 45° up, 20° down while cutting.
  • Deck Material: 1 - Piece, 10 gauge.
  • Side Skirt Material: 1/4" plate.
  • Skid Shoes Wing Deck: Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe
  • Skid Shoes Center Deck: Replaceable: 2 Skid shoes
  • Skid Shoes Weight Box: Reversible & replaceable: 1 Skid shoe
  • 4 Blades (2 per Carrier): 1/2" x 4" Heat Treated Free Swinging Alloy Steel with up lift.
  • Blade Overlap: 6"
  • Blade Bolt: Keyed with hardened flat washer & lock nut.
  • Stump Jumper / Blade Holder: Standard: 1" Thick diamond blade bar; Optional: 1" Thick diamond blade bar with round dishpan
  • Deck Ring: Optional 3/8" formed and welded.
  • Front & Rear Guards: Single chain or double chain.
  • Input Driveline 540 & 1000 PTO: ASAE Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate & Wing Drivelines: Cat. 5 with slip-clutch
  • Tire Options: 6" x 9 x 21" Laminated tires; 27" x 7.75" Used aircraft tires with foam filling; 29" x 9" Used aircraft tires without foam filling
  • Number of Wheels: 5 - Wheel option: 4 on transport axle and one on wing axle; 6 - Wheel option: 4 on transport axle and two on wing axle.
  • Standard Transport Axle: Spring-cushioned on center transport axle.
  • Axle Fasteners: 1 1/4" Greasable pins
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
  • Standard Color: Beige
  • Optional Colors: Red, Green, or Orange



Working Width
13 ft. 6 in.
14 ft. 9 1/4 in.
17 ft. 8 1/2 in.
6,125 lb.
Recommended HP
70-250 PTO hp

Related Products